IMEA - Proceedings of the 9th International Conference on Aluminium Alloys (ICAA9)

PAPERS

Invited Papers:

Aluminium Alloys – A Century of Age Hardening 1-14
I. J. Polmear

Automotive Trends in Aluminium – The European Perspective 15-23
J. Hirsch

Developments and Challenges for Aluminum – A Boeing Perspective 24-31
A. S. Warren

Extrusion of Al-Mg-Si Alloys 32-46
O. Reiso

Imaging of Aluminium Alloy Solidification by Synchrotron X Radiation 47-52
L. Arnberg, R. Mathiesen

Industrial Development of Non-Heat Treatable Aluminum Alloys 53-64
R. E. Sanders Jr, P. A. Hollinshead, E. A. Simielli

Powder Processed Aluminium Alloys 65-74
G. B. Schaffer

Research and Development of Al-Zn-Mg-Cu-Li Alloys 75-84
F. Wei , Z. K. Zhao, P. Y. Liu, T. T. Zhou

Temper Developments Using Secondary Ageing 85-95
R. N. Lumley, I. J. Polmear, A. J. Morton

The Modelling of Stable and Metastable Phase Formation in Multi-Component Al-Alloys 96-106
N. Saunders

Some Aspects of the Metallurgy of Automotive Al Alloys 107-117
D. J. Lloyd

General Papers:

A Comparison of Aging Models on Alloy 6061 118-123
R. T. Shuey, J. P. Suni, M. Tiryakioglu

A Comparison of the Effects of Age forming on the Precipitation Behaviour in
2xxx, 6xxx and 7xxx Aerospace Alloys 124-131
D. Bakavos, P. B. Prangnell, R. Dif

A Comparison of the Stress Relaxation Behaviour of Three Aluminium Aerospace
Alloys for use in Age-Forming Applications 132-138
R. F. Robey, P. B. Prangnell, R. Dif

A First Principles Study of Substitutional Copper in Aluminium 139-144
A. E. Smith, S. Homolya

A Microstructural Engineering-Based Approach to 7xxx Series Alloy Optimisation 145-151
M. R. Clinch, R. Daval, S. J. Harris, W. Hepples, N. J. H. Holroyd, M. J. Lawday, B. Noble

A Monte Carlo Simulation on PFZ Formation in a Model Binary Alloy 152-157
H. Okuda, S. Ochiai

A Simplified Empirical Model of Precipitation Strengthening in 6000 Al-Mg-Si Extrusion Alloys 158-164
M. J. Couper, B. Rinderer, M. Cooksey

A Study of Hot Tearing in Aluminium Alloys in Relation to Laser Welding: Mechanical Behaviour in the Mushy State during Non-Isothermal Tensile Testing with High Cooling Rates 165-171
D. Fabregue, A. Deschamps, M. Suery

A Study of the Response of a Zr-modified 2014 Aluminium Alloy Subjected to Fatigue Loading 172-177
P. Cavaliere, E. Cerri, P. Leo

A Study on Burr Low Frequency Vibratory Drilling 178-183
K. Adachi, A. Yoshikawa, K. Sakurai

A Study on Tapping Viewed from Eco-Machining Technology 184-189
K. Adachi, D. Aspinwall, K. Sakurai, A. Hiratsuka

A Transmission Electron Microscopy Study on Subgrain and Grain Formation during Equal-Channel Angular Pressing of an 1200 Aluminium Alloy 190-196
M. Cabibbo, E. Evangelista

Advanced Aluminum Alloys Containing Rare-earth Erbium 197-201
Z. R. Nie, J. B. Fu, J. X. Zou, T. N. Jin, J. J. Yang, G. F. Xu, H. Q. Ruan and T. Y. Zuo

Age Forming Technology for Aircraft Wing Skin 202-207
T. Adachi, S. Kimura, T. Nagayama, H. Takehisa, M. Shimanuki

Aging of Al-Li Alloys Having Composite Particles of Hardening Phases 208-211
N. I. Kolobnev, L. B. Khokhlatova, I. N. Fridlyander

Aluminium Powder Forging Process using a Rotating Platen 212-217
S. S. Youn, J. H. Park, C. W. Park, Y. H. Kim, X. Ma

Amorphous Phase Precipitates in 6061 Aluminum Alloys 218-223
A. Yamamoto, A. Maeda, H. Tsubakino

An Analysis of the Effect of Grain Refinement on the Hot Tearing of Aluminium Alloys 224-229
M. Easton, H. Wang, J. Grandfield, D. StJohn, E. Sweet

An Experimental Investigation on Thread-Connection Strength of an Al-Li Alloy Forging 230-234
H. X. Li, L. Li, Y. Fan, C. Q. Chen

An Investigation of Alternate Behavior of Corrosion and Fatigue of LY12CZ Aluminum Alloy 235-239
Z. Dong, C. Rong

An Investigation of Cast Structures in Al-Hf-(Sc)-(Zr) Alloys and their Subsequent Effect on Recrystallisation Resistance after Cold Rolling 240-245
H. Hallem, B. Forbord, K. Marthinsen

An Investigation of Sc Addition on the Extrudability, Recrystallisation Resistance and Mechanical Properties of a 6082- and a 7108-Alloy 246-251
J. Røyset, U. Tundal, S. R. Skjervold, G. Waterloo, C. Braathen, O. Reiso

Analysis of Softening Behaviour of AA1200 Alloys Using Gallium Enhanced Microscopy 252-257
H-E. Ekstrom, O. V. Mishin, L. Ostensson

Bake-hardenability of Al-Mg-Cu-X (Ag,Zn,Si) Alloy Sheets 258-263
Y. Suzuki, A. Hibino, T. Muramatsu, S. Hirosawa, T. Sato

Bending of Extruded Profiles during Extrusion Process 264-269
K. B. Müller

Characterization of Lead Enrichment on Electrochemically Activated Binary Al-Pb Model Alloy 270-276
Y. Yu, Ø. Sævik, J. H. Nordlien, K. Nisancioglu

Characterization of the Interface between d¢ Phase and Matrix in 1420 Alloy by SAXS 277-280
Chia Zhi-Gang

Cluster Dynamics in AlZr and AlSc Alloys 281-286
L. Lae, P. Guyot, C. Sigli

Coincidence Doppler Broadening and 3DAP Study of the Pre-Precipitation Stage of Al(-Li)-Cu-Mg(-Ag) Alloys 287-292
Y. Nagai, K. Hono, S. Yanagita, T. Honma, M. Hasegawa

Comparison of Axisymmetric Compression to Flat Rolling of 5083 and 6082 Aluminum Alloys 293-299
A. Airod, R. Petrov, R. Colas, Y. Houbaert

Comparison of Properties of Extruded 6xxx Alloys in T5 Temper Versus T6 Temper 300-304
J. Royset, U. Tundel, O. Reiso

Comparative Study of Gallium Enhanced Microscopy and EBSD for Revealing Grain Boundaries and Dislocation Subgrain Boundaries in Aluminium Alloys 305-311
J. Hagstrom

Constitutive Behaviour and Hot Tearing during Aluminium DC Casting 312-318
L. Katgerman, W. M. van Haaften, W. H. Kool

Control of Erosion in Brazing Sheet Produced by Continuous Annealing Process 319-324
A. Fukumoto, T. Doko

Control of Microstructure in a Spraycast Al-Mg-Li Zr Alloy 325-331
S. C. Hogg, I. G. Palmer, P. S. Grant

Controlling Technique of Pore Morphology of Highly Reliable Aluminum Foam 332-337
M. Kobashi, N. Kanetake

Corrosion Behavior of Twin-Roll Cast Al-Mg and Al-Mg-Si Alloys 338-344
F. Birol, Y. Birol

Damage Tolerant Design for a Cast Aluminium Alloy 345-350
W. J. Evans

Deficiencies in Continuous DRX Hypothesis as a Substitute for DRV Theory 351-356
H. J. McQueen

Deformation Behaviour unde Various Stress States of Al-Cu Alloys during Solidification 357-362
O. Ludwig, C. L. Martin, M. Suery

Determination of Fatigue Damage at Precipitate Level in 2024-T3 using Positron Annihilation and Nuclear Magnetic Resonance 363-368
S. van der Zwaag, A. Van Veen, H. Schut, A. J. Hill, T. J. Bastow

Development of Al-Cu-Mg-Li (Mn,Zr, Sc) Alloys for Age-Forming 369-375
N. Kamp, M. J. Starink, I. Sinclair, N. Gao, P. J. Gregson, P. D. Pitcher, S. Gardiner

Development of Porous Aluminium by Metal Injection Moulding 376-382
K. Nishiyabu, S. Matsuzaki, M. Ishida, S. Tanaka, H. Nagai

Development of Recrystallized Structure During Hot Deformation of Al-Mg-Li-Zr-Sc Alloy 383-389
Yu. M. Vainblat, N. A. Sharshagin, L. B. Khokhlatova, N. I. Kolobnev, N. V. Bukharina, L. G. Klimovich

Development of Spraycast Al-Mg-Li Alloys 390-395
I. G. Palmer, S. C. Hogg, P. S. Grant

Distortion Behaviour and Mechanical Properties of Age Hardening Aluminium Alloys after High-Pressure Gas Quenching in Comparison to Liquid Quenching 396-401
A. Gaber, K. Matsuda, Z. Yong, T. Kawabata, A. M. Ali, S. Ikeno

DSC and HRTEM Study of Precipitation in Al-Mg-Si-Cu Alloys 402-405
A. Gaber, K. Matsuda, Z. Yong, T. Kawabata, A. M. Ali, S. Ikeno

Dynamic Ageing of Two Al-Mg-Si Alloys Using Equal Channel Angular Extrusion 406-411
M. Cai, G. W. Lorimer

Early Stage Hardening of Al-Cu-Mg Alloys 412-417
K. Raviprasad, S. Moutsos

Effect of Age Hardening on Fractal Behaviour of Li-Containing Al-Mg-Si Alloys 418-423
O. A. Hilders, N. D. Pena, M. Ramos, L. Saenz, R. A. Caballero

Effect of Copper, Silver and Gold on Tensile Behaviour in Al-Mg-Si Alloy 424-428
K. Matsuda, K. Fukaya, Z. Young, T. Kawabata, Y. Uetani, S. Ikeno

Effect of Double-Ageing on Precipitation Hardening of Li Containing Al-Zn-Mg-Cu Alloys 429-432
Z. K. Zhao, Z. W. Du, T. T. Zhou, P. Y. Liu, H. X. Li, C. Q. Chen

Effect of Environmental Factors on the Corrosion of 2024T3 Aluminium Alloy 433-438
M. Guo, D. Li, S. X. Rao, B. L. Guo

Effect of External Stress on the Growth of Precipitates in Al-Cu & Al-Cu-Mg-Ag Alloys 439 - 444
Z. Zheng, D. Chen, S. Li, Z. Chen

Effect of Forced-Air Cooling on Semi-Solid Extrusion of Mechanically Stirred Al-10%Mg Alloy Billet 445-450
Y. Uetani, H. Sueda, H. Takagi, K. Matsuda, S. Ikeno

Effect of Low Temperature on Damage Evolution of Particulate Reinforced Al-Matrix Composite during Tensile Deformation 451-456
H. X. Li, F. L. Cao, L. Q. Chen, C. Q. Chen

Effect of Material Flow during Extrusion on Recrystallization Behaviour of AA6082 457-463
T. Pettersen, S. Abtahi, J. A. Saeter, T. Furu, H-E. Ekstrom

Effect of Microstructural Features on Intergranular Fractures of Al-Mg-Si Alloy Sheets 464-469
Y. Himuro, Z. Yong, K. Matsuda, S. Ikeno, K. Koyama, Y. Bekki

Effect of Microstructure on Fatigue Fracture in Aged Al-4wt%Ge Alloy 470-475
K. Nakagawa, T. Kanadani, N. Hosokawa, T. Tanimoto, L. Anthony, G. Itoh

Effect of Notch on Dynamic Tensile Properties in 6061 Aluminium Alloy 476-480
M. Takata, T. Masuda, H. Toda, T. Kobayashi

Effect of Polarization on SCC of 7075 Aluminum Alloys 482-486
J-H. Liu, G-W. Zhu, D. Li, B-I. Guo, P-Y. Liu

Effect of Process Parameters on Structure Formation during Direct-Chill Casting of an Al-Cu Alloy 487-493
D. G. Eskin, J. Zuidema (Jr), V. I. Savran, L. Katgerman

Effect of Reversion on the Bake Hardening Response of Al-Mg-Si(-Cu) Alloy 494-500
T. Honma, K. Matsumoto, Y. Nagai, M. Hasegawa, K. Hono

Effect of Sc and Heat Treatment on Microstructure and Properties of a 7XXX DC Cast Alloy 501-506
O. N. Senkov, R. B. Bhat, S. V. Senkova, J. Tatalovich

Effect of Sc on the Ageing and Microstructure of an Al-Cu-Mg Alloy 507-512
Z. Chen, Z. Zheng, S. P. Ringer

Effect of Sc+Zr Addition on Structures and Mechanical Properties of Rapidly Solidified 7090 Based Alloys 513-519
M. Sugamata, H. Fujii, Junichi Kaneko, M. Kubota

Effect of Sn Addition on the Two-Step Aging Behavior in Al-Mg-Si Alloys for Automotive Application 520-526
M. Saga, M. Kikuchi

Effect of Strain per Pass on Formation of Texture and Microstructure during Asymmetrical Rolling in AA 1050 527-532
M-Y. Huh, Y-K. Jee, J-C. Lee, O. Engler

Effect of Zirconium on Liquidus and Hardening of Al–6%Ni Casting Alloy 533-538
N. A. Belov, V. S. Zolotorevskiy, Shoji Goto, A. N. Alabin, V. V. Istomin-Kastrovskiy, V. I. Mishin

Effects of Ag on Ag-Hardening Behaviour of Al-Mg-Si Alloys 539-544
Y. Zou, K. Matsuda, T. Kawabata, Y. Himuro, S. Ikeno

Effects of Ageing on the Formability of Aluminium Alloy AA 6063 545-551
R. Gao, K. Stiller, A. Oskarsson

Effects of Er on Microstructures and Properties of Al-Zn-Mg Alloys 552-557
H. Ruan, T. Jin, J. Yang, G. Xu, J. Zou, Z. Nie

Effects of Homogenization and Cooling after Extrusion on Microstructure and Ageing Kinetics of Aluminum Alloy 2014 558-563
G. Szilágyi, M. Gonçalves

Effects of Natural Aging Conditions on the Bake Hardenability of Al-Mg-Si Alloys 564-569
H. Hatta, S. Matsuda, H. Tanaka, H. Yoshida

Effects of Rapid Solidification on Microalloyed Al-Cu-Mg Alloys 570-575
K. Raviprasad, I. J. Polmear

Effects of Residual TiB2 and TiAl3 Nucleant on Grain-Refinement of Recycled Aluminum-Silicon Alloy Castings 576-581
C. Limmaneevichitr, W. Eidhed, N. Eisuke

Effects of Si and Ge Addition on the Al3Zr Precipitates in an Al-0. 6mass%Zr Alloy 582-587
F. Nakamura, S. Hirosawa, T. Sato

Effects of Surface Preparation on the Microstructure of ARB Processed Aluminium 588-594
C. P. Heason, P. J. Apps, P. B. Prangnell

EFTEM Observation of Cube-Shaped Precipitates in Al-Mg-Si Alloy 595-597
K. Matsuda, Y. Ishida, T. Sato, S. Ikeno

Evaluation of Tensile Strength of Friction-Welded Joints of Aluminium to Copper 598-603
H. Ochi, Y. Yamamoto, K. Ogawa, R. Tsujino, T. Sawai

Evolution of Precipitates during Age-hardening of AW 6016 Alloy 604-609
R. Sciffmann, J. Haug, J. Banhart

Extrusion Analyses by FEM and by Traditional Methods for 7075 Materials 610-615
H. J. McQueen, Y. Yao

Fatigue Crack Propagation in 2195-T8 Aluminium Alloy Plate 616-621
R. Doglione, M. Bartolone

Fatigue Evaluation of Novel HVOF Spray Coated Al Bearing Alloys 622-627
M. C. Mwanza, M. S. Ali, S. Syngellakis, C. Perrin, P. A. S. Reed

Fatigue Mechanisms of Aluminium Alloy Assemblies 628-633
H. Proudhon, J-Y. Buffière, S. Fouvry

Fatigue Performance of Cast and Powder Metallurgy Aluminium-Based MMCS 634-639
W. J. Evans, N. Mohd Shariff

Fatigue Strength of Aged and Reversion-Treated Al-Zn Alloys 640-645
A. Sakakibara, A. Saijo, T. Kanadani, K. Nakagawa, M. Hino

Formability of a Twin- Roll Cast AA 6016 Sheet for Automotive Applications 646-651
M. Dündar, Y. Birol

Formation and Morphology of Hardening Nanostructures in an AlZnMg Alloy 652-658
G. Riontino, A. Dupasquier, R. Ferragut, M. M. Iglesias, C. Macchi, M. Massazza, P. Mengucci, A. Somoza

Formation of Primary TiAlSi Intermetallic Compounds in Al-Si Foundry Alloys 659-665
X. -G. Chen, M. Fortier

Formation Mechanisms of Precipitate Free Zones in Age-Hardenable Al Alloys 666-671
S. Hirosawa, Y. Oguri, T. Ogura, T. Sato

Fracture Analysis of a Crack Propagating in Aluminium-7% Silicon Alloy Casting 672-677
S. Nishido, H. Toda, T. Kobayashi, J. Katano

Friction Stir Welding of Dissimilar Aluminium Alloys 678-683
R. Braun, U. Alfaro Mercado, C. Dalle Donne

From Breakdown Rolling to Cup Testing – Integral Through-Process Texture Modeling of AA5182 684-691
M. Crumbach, M. Goerdeler, G. Gottstein, L. Neumann, H. Aretz, R. Kopp, L. Löchte

Fundamentals of Developing ?ompositions for Weldable Wrought Aluminium Alloys with Enhanced Heat Resistance 692-699
E. F. Chirkov

Grain Refinement of Al Alloy by Compressive Torsion Processing 700-704
Y. Kume, M. Kobashi, N. Kanetake

Grain Refiner Fade in Aluminium Castings 705-710
P. L. Schaffer, J. W. Zindel, A. K. Dahle

Heterogeneous Precipitation in 1424 Al–Mg–Li Alloy 711-717
L. B. Khokhlatova, A. A. Alekseev, E. A. Lukina

High Speed Twin-Roll Casting of Aluminum Alloys 718-723
T. Haga, M. Ikawa, H. Watari, S. Kumai

High Temperature Strength of Three 6060 Extrusion Alloys with Different Content of Alloying Elements 724-729
J-A. Saeter, T. Iveland, O. Reiso

Hot Tensile Ductility and Dynamic Grain Growth in Submicron Al-Sc and Al-Mg-Sc
Alloys 730-735
R. K. W. Marceau, M. Ferry

HRTEM Observations and Simulations of the S’’-Phase in Al-Mg-Cu Alloys and Implications for Al-Cu-Mg Alloys 736-741
L. Kovarik, S. A. Court, M. J. Mills

HRTEM Study of Precipitates at the Early Stage during Aging in Al-Mg-Si-Cu Alloy 742-745
S. Taniguchi, K. Matsuda, T. Sato, S. Ikeno

Hydrogen Microprint with EBSP Analysis in Tensile-Deformed Al-5%Mg Alloy 746-750
K. Horikawa, K. Yoshida

Hydrogen Permeation Behaviour in Aluminium Alloys 751-757
T. Izumi, G. Itoh, N. Itoh

Improvement of Textures in Aluminum Alloy Sheets by Asymmetric Warm Rolling 758-763
O. Noguchi, T. Komatsubara, T. Sakuma, R. Baba, K. Yoshida

Industrialisation of Aluminium Foam Technology 764-770
J. Banhart

Influence of Heat Treatments and Straining Steps on Mechanical Properties in the Stretch Forming Process 771-776
E. N. Straatsma, L. Velterop

Influence of Magnesium and Copper Additions on the Low Temperature Thermal Stability of Al-Li Alloys 777-781
B. Noble, S. J. Harris, S. Katsikis, K. Dinsdale

Influence of Mechanical Alloying and Sn and TiCN Additions on the Liquid Phase Sintering of a 2xxx Series Alloy 782-786
M. L. Delgado, E. M. Ruiz-Navas, J. M. Torralba, W. A. P. McPhee, G. B. Schaffer

Influence of Punch Shape on Drawability of Local Solution Treated 6061 Al Alloy Sheets 787-792
T. Nishiwaki, N. Kanetake

Influence of Small Additions of Sc and Ag on the Microstructure and Properties of Al Alloy 7017 793-798
A. K. Mukhopadhyay, K. S. Prasad, V. Kumar, S. V. Kamat

Influence of Stress Ratio of Biaxial Tensile Test on the Lüders Band Formation in Al-Mg Alloy Sheets 799-804
T. Minoda, K. Shibue, H. Yoshida

Influences of Li on Corrosion Resistance of 7075 and 7055 Aluminum Alloys 805-810
G-W. Zhu, D. Li, P-Y. Liu, J-H. Liu, B-I. Guo

In-situ Observations of Recrystallisation in AA3103 using FEG-SEM and EBSD 811-817
E. Anselmino, A. Miroux, S. van der Zwaag, G. G. E. Seward, N. C. A. Seaton, D. J. Prior

Intergranular Corrosion of Extruded AA6000-Series Model Alloys 818-824
G. Svenningsen, M. Hurlen Larsen, J-E. Lein, J-H. Nordlien, K. Nisancioglu

Investigation of Al-Fe-Si Alloys with Additions of Hf, Sc and Zr 825-831
H. Hallem, B. Forbord, K. Marthinsen

Laser Beam Welded T-Joints of 6013 Aluminium Alloy Sheet 832-837
R. Braun, G. Roth

Lattice Rotation and Recovery in Cube-oriented Grains in Partially Recrystallized Pure Aluminium after Rolling of Heavy Reduction 838-843
T. Murakami, S. Ochiai

Medium and Short Range Order Structures in Al Based Alloy Melts 844-849
B. Xiufang, Q. Jingyu

Micro-Mechanistic Crack Closure Modelling of Constant Amplitude and Variable Amplitude Fatigue in Damage Tolerant Airframe Aluminium Alloys 850 - 855
K. H. Khor, N. Kamp, K. D. Singh, M. R. Parry, Y. Xu, I. Sinclair

Microstructural Evolution in Pure Aluminium and a 7034 Alloy Processed by Equal-Channel Angular Pressing 856-861
N. Gao, M. J. Starink, C. Xu, T. G. Langdon

Microstructure and Mechanical Properties of the Magnetic Pressure Seam Welded SPCC/6111-T4 Plates 862-866
T. Arai, K-J. Lee, S. Kumai, A. Sato, T. Aizawa

Microstructure and Properties of AlFe-Alloys (AA 1050 – AA 8021) for Packaging 867-872
J. Hasenclever

Microstructure in Friction Stir Welded SPCC / 6022 Aluminum Alloy Joints 873-877
K. Suzuki, S. Kumai, H. Sato, K-J. Lee, T. Ookawa, A. Sato

Microstructure of Friction Stir Welded 6061 Aluminum Alloy 878-882
L. Liu, H. Nakayama, S. Fukumoto, A. Yamamoto, H. Tsubakino

Microstructure Property Relationships in a High Strength Al-Zn-Mg-Cu-Zr Alloy 883-888
A. K. Mukhopadhyay, G. M. Reddy, K. S. Prasad, V. K. Varma, C. Mondal

Microstructures and Mechanical Properties of Al-Fe Composites Produced by Plasma Synthesis Method 889-894
J-M. Lee, S-B. Kang, C-Y. Lim, T. Sato

Modeling of Dendritic and Eutectic Microstructures in Solidification of Aluminum Alloys 895-900
M. F. Zhu, C. P. Hong

Modeling of Microstructure Evolution during Multi-pass Rolling for AA5083 using a Physically Based Approach Integrating FE Model Predictions 901-906
H. Ahmed, M. A. Wells, D. M. Maijer, M. R. van der Winden

Modelling Al3Zr Precipitation in An AA7050 Alloy 907-912
C. Liu, Y. Bi, R. Benedictus

Modelling Dispersoid Precipitation and Recrystallization in Scandium and Zirconium Containing Aluminium Alloys 913-918
J. D. Robson, B. J. McKay, C. P. Heason

Modelling of Precipitation Behaviour of Fe and Si of Commercial Purity Aluminium 919-925
K. Kajihara, Y. Sugizaki, Y. Seki

Modelling of Precipitation Hardening of Al-Cu-Mg Alloys 926-932
J. Yan, M. J. Starink, N. Gao

Modelling the Microstructural Evolution During Hot Rolling and Subsequent Cold Rolling and Annealing of an AA3103 Alloy 933-938
K. Marthinsen, S. Abtahi, K. Sjølstad and E. Nes

Modelling the Stress-Strain Behaviour for Aluminum Alloy AA6111 939-944
W. J. Poole, D. J. Lloyd

Modification of Al-Si Alloys 945-950
K. Nogita, S. D. McDonald, A. K. Dahle

Modification of Fe-containing Intermetallic Compounds in an Al-Si-Cu-Fe Cast Alloy Using Sr, Li and Mn Additions 951-955
P. Ashtari, H. Tezuka, T. Sato

Nano-cluster Controlled Precipitation in Al-Cu and Al-Mg-Si Alloys Containing Microalloying Elements 956-962
T. Sato, K. Hirose, S. Hirosawa

New Extrusion Method for Changing Wall Thickness of Circular Tube 963-968
Takahiro Makiyama, Takashi Kuboki and Makoto Murata

New Generation High Strength High Damage Tolerance 7085 Thick Alloy Product
with Low Quench Sensitivity 969-974
D. J. Chakrabarti, J. Liu, R. R. Sawtell, G. B. Venema

Observations of Deformation in Secondary Aged Aluminium Alloys 975-980
R. G. O’Donnell, R. N. Lumley, I. J. Polmear

On the Fatigue of Sintered Aluminium Alloys 981-985
G. N. Grayson, G. B. Schaffer, J. R. Griffiths

On the Long-Term Stability of 6013-T6 Aluminium Alloy Sheet 986-991
R. Braun

Particle Pinning in a Nanocrystalline Al-Sc Alloy 992-997
N. E. Hamilton, M. Ferry

Phase Selection and Phase Transformation in Eutectic Iron-bearing Particles in a DC-Cast AA5182 Alloy 998-1003
Y. J. Li, L. Arnberg

Plastic Anisotropy in Recrystallized and Unrecrystallized Extruded Aluminium Profiles 1004-1009
Ø . Ryen, B. Holmedal, S. Li, P. Van Houtte, H. J. Roven, E. Nes

Plasticity-Fractal-Behavior Trends for Different Aluminum Alloys Tested in Tension 1010-1015
O. A. Hilders, M. Ramos, N. D. Peña, L. Sáenz, R. A. Caballero

Porosity Formation and Eutectic Growth in Al-Si-Cu-Mg Alloys Containing Iron and Manganese 1016-1021
C. M. Dinnis, J. A. Taylor, A. K. Dahle

Positron Annihilation Study of Secondary Ageing in AlCu 1022-1027
R. Ferragut,, G. Ferro and M. Biasini

Positron Studies of Precipitation in 6061 Aluminium Alloy 1028-1033
J. Buha, P. R. Munroe, R. N. Lumley, A. G. Crosky, A. J. Hill

Possibilities of Rapidly Solidified Thin Strips Produced by a Twin Roll Caster for New Alloy Development and High-grade Recycling of Widely-used Conventional Alloys 1034-1039
S. Kumai, K. Suzuki, Y. Saito, A. Sato, T. Haga

Predicting the Effect of Alloy Composition on the Intermetallic Phase Transformation Kinetics in 6XXX Extrusion Alloys 1040-1045
N. C. W. Kuijpers, F. J. Vermolen, C. Vuik, S. van der Zwaag

Processing of MMC Reinforced with Small-size Particles 1046-1050
V. Popov, A. Aksenov, D. Lesuer, E. Vershinina, O. Smirnov, A. Marmulev

Product Properties of High Workability 1441 Al-Li Alloy 1051-1054
J. N. Fridlyander, V. V. Antipov, T. P. Fedorenko

Quality Control of Extrusion Strength for the Petronas KLCC Twin Towers Curtainwall 1055-1060
P. Lalas

Quantitative Analysis of the Vicinity of Grain Boundaries with Precipitate Free Zones in Al-Zn-Mg (-Ag) Alloys 1061-1066
T. Ogura, S. Hirosawa , T. Sato

Quantitative Evaluation of Precipitation in an Al-Zn-Mg-Cu Alloy 1067-1072
Z. W. Du , T. T. Zhou , P. Y. Liu ,Z. K. Zhao , C. Q. Chen , H. Zhao

Recrystallisation and the Rate of Mn Precipitation in AA3103 1073-1079
Z. J. Lok, A. Miroux, S. van der Zwaag

Recrystallization of an AlMgSi Alloy Deformed in Hot Torsion 1080-1085
T. Pettersen, E. Nes

Reduction of Temperature Extremes at the Die Exit in Aluminum Alloys Extrusion 1086-1091
D. S. Salonine, H. J. McQueen

Rheo-Diecasting of Al-Alloys 1092-1097
Z. Fan

Sigma (s) Phase Precipitation during Prolonged Ageing of an Al-Cu-Mg-Ag Alloy 1098-1103
R. N. Lumley, I. J. Polmear

Simulation of Concurrent Precipitation Effect on Recrystallisation Kinetics in AA3103 1104-1109
A. Miroux, E. Anselmino, S. van der Zwaag

Simulation of Fatigue Behaviour in Fusion Welded 2024-T351 1110-1115
F. Lefebvre, G. Serrano, S. Ganguly, I. Sinclair

Simulation of Precipitation Processes in Commercial Aluminum Alloys 1116-1122
G. Gottstein, M. Schneider, L. Löchte

Stress Analysis of Compression of Aluminium with Rotating Tools 1123-1127
X. Ma, M. R. Barnett, Y. H. Kim

Structural Parameters of Partially Homogenized Ingots of High-Strength Al-Zn-Mg-Cu System Alloys 1128-1134
O. G. Senatorova, I. N. Fridlyander, N. R. Bochvar, A. U. Sukhikh, V. V. Sidelnikov, I. I. Molostova

Studies of Secondary Ageing in Aluminium Alloys 1135-1140
A. Dupasquier, A. Somoza, R. N. Lumley and I. J. Polmear

Study of Precipitation and Recovery Kinetics in a 6xxx Automotive Sheet Alloy 1141-1147
A. K. Gupta, C. Doutre, D. J. Lloyd

Surface Roughness and Tool Wear during Single-Point Diamond Turning of Rapidly Solidified Aluminium Alloys 1148-1153
J. K. Belgraver, W. H. Kool, J. M. Oomen

Surface Segregation of Several Elements in High Purity Aluminum Foils 1154-1159
H. Tsubakino, Y. Yamamoto, A. Yamamoto, L. Liu, M. Terasawa, T. Mitamura, K. Yoshida, A. Kinomura, Y. Horino

Tear Toughness Evaluation of Aluminum Alloy Castings Using a Small-Size Specimen 1160-1166
H. Zhu, S. Kumai, A. Sato

TEM Analysis of an Interrupted Aged 6061 Aluminium Alloy 1167-1172
J. Buha, R. N. Lumley, P. R. Munroe, A. G. Crosky

Texture-Dependent Recrystallization in Aluminum 1050 1173-1178
A. D. Rollett, M. Alvi, A. Brahme, J. Fridy, H. Weiland, J. Suni, S. Cheong

The Effect of Alloying Elements on Precipitation and Recrystallisation in Al-Zr Alloys 1179-1185
B. Forbord, H. Hallem, K. Marthinsen

The Effect of Concurrent Precipitation on the Recrystallisation Texture of an AlMn-Alloy 1186-1191
K. Sjølstad, O. Engler, K. Marthinsen, E. Nes

The Effect of Cu on Precipitation in Al-Zn-Mg Alloys 1192-1197
Zs. Kovács, N. Q. Chinh, K. Süvegh, T. Marek, Gy. Horváth, J. Lendvai, D. H. Ping, K. Hono

The Effect of Fe and Mn Content on Coarse Grain Formation during Homogenisation of 6000 Series Alloys 1198-1203
E. D. Sweet, E. S. Charles, M. J. Couper

The Effect of Retrogression and Reaging Treatments on Residual Stress in AA7075 1204-1209
A. Grosvenor, C. H. J. Davies, K. Sharp

The Effect of Sc on the Recrystallisation Resistance and Hardness of an Extruded and Subsequently Cold Rolled Al-Mn-Mg-Zr Alloy 1210-1215
J. Røyset, Y. W. Riddle

The Effect of Si Content on the Size of b-Al5FeSi Intermetallics in Al-Si-Cu-Mg Casting Alloys 1216-1221
A. Lucas, C. H. Cáceres, J. A. Taylor

The Effect of Ti Content on Mechanical Properties of an Al7Si0. 35Mg Alloy 1222-1228
C. L. Smith, M. A. Easton, J. F. Nie, X. Zhang, M. J. Couper

The Effects of Dispersoids on the Recrystallization Behavior in a Cold Rolled AA3103-Aluminium Alloy 1229-1234
Stian Tangen, Hans Bjerkaas, Trond Furu, Erik Nes

The Effects of Homogenization Conditions on the Hot Ductility Behaviour of AA2024 Aluminum Alloys 1235-1242
A. Saeed-Akbari, A. Zarei-Hanzaki, R. Rahmanian, Gh. R. Ebrahimi

The Etching of Aluminium Alloy 2024-T3 in a Non-chromate Fe(III)-HF-HNO3 Deoxidiser: an Atomic Force and Scanning Kelvin Microscopy Study. 1243-1248
T. H. Muster, A. E. Hughes, T. G. Harvey, T. Nikpour, S. G. Hardin

The Formation of Segregation Bands in Al-Si Castings 1249-1255
C. M. Gourlay, H. I. Laukli, A. K. Dahle

The Homogenisation, Extrusion and Ageing of a Commercial 2xxx Series (Al-Cu)
Aluminium Alloy 1256-1262
M. J. Lawday, M. R. Clinch, S. J. Harris, B. Noble

The Influence of Precipitation Annealing Procedure on the Recrystallisation Resistance of Al-Mn-Zr Alloys with and Without Sc 1263-1269
B. Forbord, H. Hallem, K. Marthinsen

The Influence of Zirconium and Silicon Additions on the Microstructure and Hardening of Al–2% Mn Sheet Alloys 1270-1275
N. A. Belov, A. N. Alabin, V. V. Istomin-Kastrovskiy